The Strength (Designs By Stina Inspired)

View previous topic View next topic Go down

The Strength (Designs By Stina Inspired)

Post  Admin on Sun Apr 01, 2012 8:59 am




Tutorial Title: The Strength
Written By: DesignsByKarma
Written On: October 4, 2011

This tutorial assumes you have a good working knowledge of Paint Shop Pro and its tools. It was written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush, mask, frame, tube, template or preset that belongs to you and I do not have you listed please let me know which items is yours and give me a link to your site so I can give you credit and a link!!

Materials: Not Included:
1 Scrap Kit: ImmortalLove By:
Designs By Stina
1 Template: MC_Template3 By: Melissaz Creationz
2 Tubes: Robert_Pat and Bella_2: Made Exclusive for the Exclusive Club of PicsForDesign


Materials: Included: Supplies
2 wordarts: thestrength_wordart 1 & 2 By: DesignsByKarma

Plug-Ins Used: Not Provided:
Greg's Factory Output Vol2: Waffle
Graphics Plus: Emboss
EyeCandy 4.0: Gradient Glow:

Settings used throughout tutorial:
Waffle settings: Default
Emboss: default
Gradient Glow: Basic: 1.5 , 25, 100, Color: #b86d6d
Drop Shadow: 2, 3, 50, 5.00, #000000

Unzip all supplies. Let's Begin!

Tutorial: Instructions:
1. Open the template: SHIFT+D and close original.
a. Delete Raster 1 and word art.
b. Image: Canvas Size: 650 * 650 centered.
c. Add layer: fill with #ffffff and send to the bottom.

2. Highlight the frames layer:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

3. Open paper 15: CTRL+C and close

4. On template: CTRL+L
a. CTRL+SHIFT+I
b. Hit the delete key
c. CTRL+D
d. Delete the original frames

5. Highlight small rectangles
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

6. Open paper 8: CTRL+C and close

7. On template: CTRL+L
a. CTRL+SHIFT+I
b. Hit the delete key
c. CTRL+D
d. Delete the original small rectangles

8. Open your 1st tube: Resize: 90 %: CTRL_C and close

9. On your template: Highlight the small rectangles:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F
b. CTRL+L
c. CTRL+SHIFT+I
d. Hit the delete key
e. Using your eraser tool to erase any portion of the tube in any of the other squares.
f. CTRL+D
g. Duplicate:
h. On the top tube: Adjust: Gaussian Blur: 4.32, change mode to hard light.
i. On the bottom tube: change mode to luminance (l)
j. Repeat if for the second square.
k. CTRL+D

10. Repeat step 8 and 9 for the right side of the squares.

11. CTRL+L: Resize: 150 px (width) move to the bottom of the frame. (see mine for placement)
a. Add drop shadow.

12. Highlight frames layer;
a. Effects: Plugins: Eye Candy 4.0: Gradient Glow. (using the settings above)

13. Highlight small circle:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

14. Open paper 1: CTRL+C and close

15. On template: CTRL+L
a. CTRL+SHIFT+I
b. Hit the delete key
c. CTRL+D
d. Delete small circle
e. Apply the gradient glow
f. Add drop shadow with settings above.
g. Repeat step 11 for the other 3 remaining circles. (you can use the same paper or use 3 different ones.)

16. Highlight dotted swirl:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

17. Open paper 11: CTRL+C and close

18. On template: CTRL+L
a. CTRL+SHIFT+I
b. Hit the delete key
c. CTRL+D
d. Delete dotted swirl
e. Apply the gradient glow
f. Apply drop shadow.

19. Repeat step 14 for the lg dotted circle and xl dotted circle.

20. Open up thestrength_wordart1: CTRL+C and close

21. On template: CTRL+L and move to the left side of the template and up over the lrg circle. (see mine for placement)
a. Add gradient glow
b. Add drop shadow.

22. Open up thestrength_wordart2: CTRL+C and close

23. On template: CTRL+L and move to the right side of the template and up over the xl circle. (see mine for placement)
a. Add gradient glow
b. Add drop shadow

24. Open rosechain1: CTRL+C and close

25. On template: CTRL+L
a. Using your selection tool
b. Draw a rectangle around the left chain. (get as close as possible to the leaves of the rose.)
c. Hit the delete key.
d. Repeat for the right side.
e. Move to the left and slightly up. (see mine for placement.) There is still chain that is hanging over the left side of the circle use your eraser to erase the chain.
f. Add drop shadow.
26. Open watch. CTRL+C and close

27. On template: CTRL+L
a. Resize: 250 px (width) all layers unchecked.
b. Move to the right upper corner. (see mine for placement)
c. Use your eraser tool to erase the chain that is hanging over the word art and the lr circle.
d. Add drop shadow.

28. Open glitter heart 3. CTRL+C and close

29. On template: CTRL+L
a. Move this layer above the white background.

30. Open chess peices01: CTRL+C and close

31. On template: CTRL+L
a. Resize: 170 px (width) all layers unchecked.
b. Move to the left and above the first frame. (see mine for placement)

32. Open wedding rings: CTRL+C and close

33. On template: CTRL+L
a. Resize: 112 px (width) all layers unchecked.
b. Move to the right side of the template. (see mine for placement)
c. Add drop shadow.
d. CTRL+R: Left: 32.00
34. Open chalice: CTRL+C and close

35. On template: CTRL+L
a. Resize: 200 px (width) all layers unchecked.
b. Move this layer under your main tube layer.
c. Add drop shadow

36. Open pianokeys: CTRL+C and close

37. On template: CTRL+L
a. Move to the bottom of the template: (see mine for placement)
b. Move this layer above the glitter heart layer.
c. Add drop shadow

38. Open ribbon1: CTRL+C and close

39. On template: CTRL+L
a. Resize: 225 px (width) all layers unchecked.
b. Move to the bottom left side of the frame. Move this layer above the chalice layer. Your ribbon should look like it is attached to the chalice. (see mine for placement)
c. Add gradient glow
d. Add drop shadow
e. Move your main tube layer to the top.

40. Open ribbon heart 1. CTRL+C and close

41. On template: CTRL+L
a. Resize: 120 px (width) all layers unchecked
b. Move over the top of the ribbon. (see mine for placement)
c. Add gradient glow
d. Add drop shadow.
e. Merge all flatten.

42. Resize: 500 px (width) all layers checked.

43. Add copy right information, text and watermark.

44. Save as .jpg

You have just completed: The Strength...Thank you for trying my tutorials.
DesignsByKarma

Admin
Admin

Posts : 69
Join date : 2012-03-26

View user profile http://designs-by-karma.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum