Betrayed = PAYBACK (Sleek n Sassy Inspired)

View previous topic View next topic Go down

Betrayed = PAYBACK (Sleek n Sassy Inspired)

Post  Admin on Sun Apr 01, 2012 9:31 am




Tutorial Title: Betrayed = PAYBACK
Written By: DesignsByKarma
Written On: July 18, 2011


This tutorial assumes you have a good working knowledge of Paint Shop Pro and its tools. It was written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush, mask, frame, tube, template or preset that belongs to you and I do not have you listed please let me know which items is yours and give me a link to your site so I can give you credit and a link!!

Materials: Not Included:
1 scrapkit: Betrayed by: Sleek n Sassy Designz
1 tube: I am using the wonderful work of ©Delphine Levesque Demers which I purchased from C.I.L.M but now must be purchased at Creative Design Outlet (CDO)
2 Images: I am using a desert Image called "Road in the desert" and the other image is called "motorbikes!" you can get these stock images from Stock.xcng

Materials: Included: Supplies
1 Betrayed = PAYBACK Alpha Channel Template: By: © DesignsByKarma
1 bag of tesicles: By: © DesignsByKarma
1 wordart: By: © DesignsByKarma

Settings used throughout tutorial:
Drop Shadow 1: (-1),(-1), 50, 10.00, #000000
Drop Shadow 2: 0, 1, 25, 4.00, #000000
Drop Shadow 3: 3, 3, 60, 5.00, #000000
Drop Shadow 4: (-2), (-2), 50, 5, #000000
Drop Shadow 5: (-2), 2, 50, 5, #FFFFFF

Unzip all supplies. This tutorial has 2 parts. Let's Begin!

Tutorial: Instructions:
Part 1:
1. Open up frame 3: SHIFT+D and close the original.
a. Using your magic wand click inside the frame.
b. Selections: Modify: Expand: 4
c. Layers: New Layer:

2. Open paper3: CTRL+C and close

3. On the frame canvas: SHIFT+CRTL+L
a. Do Not Deselect
b. Move this below the frame layer
c. Layers: New Layer

4. Open your desert image: CTRL+C and close

5. On the frame canvas: SHIFT+CTRL+L
a. Do Not Deselect
b. Change mode to hard light and the opacity to 36 mo
c. Move this below the frame layer if it is not there already but above the paper layer.
d. Layers: New Layer

6. Open your motorbike image: CTRL+C and close

7. On the frame canvas: SHIFT+CTRL+L
a. CTRL+D
b. Change mode to hard light and the opacity to 36 mo
c. Move this below the frame layer if it is not there already but above the desert image layer.
8. Highlight the frame layer: Add the drop shadow with the drop shadow #1 settings above.
a. Mere visible.
9. Set this new image aside for later use.

Part 2:
1. Open my alpha channel template: It may look like empty but it is not. SHIFT+D and close original.
2. Open curtians: CTRL+C and close

3. On the template: Highlight the Curtain Layer: Selections: Load/Save Selections: Load selection from Alpha Channel. Choose the Curtain Layer.
a. CTRL+SHIFT+L
b. CTRL+D
c. Add drop shadow with the drop shadow #1 settings above.

4. Open paper16: CTRL+C and close

5. On the template: Highlight the Mask Layer: Selections: Load/Save Selections: Load selection from Alpha Channel. Choose the mask layer.
a. CTRL+SHIFT+L
b. CTRL+D
c. Add drop shadow above with the drop shadow #2 settings.

6. Highlight the Picture Layer: Selections: Load/Save Selections: Load selection from Alpha Channel. Choose the picture layer.

7. Activate the image we created in part 1. CTRL+C and close.

8. On the template: CTRL+SHIFT+L
a. CTRL+D

9. Open wings2: CTRL+C and close

10. On the template: CTRL+L
a. The wings up to the center of the picture frame (see mine for placement)
b. Move this layer below the picture frame layer.
c. Add drop shadow with the drop shadow #3 settings above.

11. Highlight the upper left corner layer: Selections: Load/Save Selections: Load selection from Alpha Channel. Choose the upper left hand corner layer.

12. Open paper11: CTRL+C and close

13. On the template: CTRL+SHIFT+L
a. CTRL+D
b. Add drop shadow with the drop shadow #4 settings above.
c. Highlight the lower right hand corner layer: Selections: Load/Save Selections: Load selection from Alpha Channel. Choose the lower right hand corner layer.
d. CTRL+SHIFT+L
e. CTRL+D
f. Add drop shadow.

14. Open poison. CTRL+C and close

15. On template. CTRL+L
a. Resize: 120 px width (all layers unchecked)
b. Move to the lower right hand corner (see mine for placement)
c. Add drop shadow with drop shadowing #5 settings above.

16. Open lips; CTRL+C and close

17. On template: CTRL+L
a. Resize: 120 px width (all layers unchecked)
b. Move to the upper left hand corner (see mine for placement)
c. Add drop shadow with drop shadowing #5 settings above.

18. Open chair. CTRL+C and close

19. On template: CTRL+L
a. Resize: 500 px width (all layers unchecked)
b. Move to the lower left hand corner (see mine for placement)
c. Add drop shadow with drop shadow #3 settings above.

20. Open tesicles in a ziplock bag: CTRL+C and close

21. On template: CTRL+L
a. Resize: 375 px width (all layers unchecked)
b. CTRL+R: Right: 32.00
c. Move to the upper right hand corner (see mine for placement)
d. Add drop shadow with drop shadow #2 settings above.

22. Open string bow; CTRL+C and close

23. On template: CTRL+L
a. Resize: 375 px width (all layers unchecked)
b. CTRL+R: Right: 32.00
c. Move to the upper right hand corner (see mine for placement)
d. Add drop shadow with drop shadow #3 settings above.

24. Open your tube: CTRL+M if you are using the same tube I am (remember you must have proper license to use this tube). CTRL+C and close

25. On the template: CTRL+L
a. Resize: 532 px width (all layers unchecked)
b. Move to the left side of the template: (see mine for placement)
c. Add drop shadow with drop shadow #3 settings above.
d. Merge Visible.
e. Resize: 500 px width (all layers checked)

26. Open the word art: Highlight the may I layer: CTRL+C (DONOT CLOSE)

27. On the template: CTRL+L
a. Resize: 275 px width (all layers unchecked)
b. Move to the upper center of the template: (see mine for placement)
c. Adjust: Sharpness: Sharpen
d. Add drop shadow with drop shadow #4 settings above.

28. Activate the word art: Highlight the but I layer: CTRL+C and close

29. On the template: CTRL+L
a. Resize: 250 px width (all layers unchecked)
b. Move to the upper portion of the picture frame of the template: (see mine for placement)
c. Adjust: Sharpness: Sharpen
d. Add drop shadow with drop shadow #4 settings above.

30. Open the word art: Highlight the Payback layer: CTRL+C and close

31. On the template: CTRL+L
a. Resize: 380 px width (all layers unchecked)
b. Move to the lower center portion of the template: (see mine for placement)
c. Add drop shadow with drop shadow #4 settings above.
d. Merge: All Flatten

32. Add your copyright information, watermark and Text.
a. Add drop shadow with any drop shadow.

33. Save as .jpg

You have just completed: Betrayed = PAYBACK...Thank you for trying my tutorials.
DesignsByKarma

Admin
Admin

Posts : 69
Join date : 2012-03-26

View user profile http://designs-by-karma.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum