Wisterial Lane (Designs By Stina Inspired)

View previous topic View next topic Go down

Wisterial Lane (Designs By Stina Inspired)

Post  Admin on Sun Apr 01, 2012 9:37 am





Tutorial Title: Wisterial Lane
Written By: DesignsByKarma
Written On: June 13, 2011

This tutorial assumes you have a good working knowledge of Paint Shop Pro and its tools. It was written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush, mask, frame, tube, template or preset that belongs to you and I do not have you listed please let me know which items is yours and give me a link to your site so I can give you credit and a link!!

Materials: Not Included:
1 Scrap Kit: Wisteriallane By: Designs By Stina
1 template: gemsmask-98 GemsTagginScraps
1 to 3 tubes: I am using the wonderful work of © Anna Marine
which must be purchased at Creative Design Outlet

Materials: Included: Supplies
1 wisteriallane_temp: By: © DesignsByKarma
1 pattern: silver54

Settings used throughout tutorial:
Drop Shadow #1: 1,1,45,6,#000000
Drop Shadow #2: 0,1,25,4,#000000
Drop Shadow #3: 0,2,30,6,#000000
Drop Shadow #4: 3,3,60,5,#000000

Unzip all supplies. Let's Begin!

Tutorial: Instructions:

1.) Open up wisteriallane_temp: SHIFT+D and close original.
a. Highlight the large mat layer: CTRL+A, CTRL+F, CTRL+SHIFT+F,

2.) Open tube: CTRL+C and close

3.) On template: CTRL+L:
a. Resize: 65 % (all layers unchecked)
b. CTRL+SHIFT+I, Hit your delete key
c. CTRL+D
d. Change blend mode to: lumiance (l)
e. Merge down.

4.) Highlight large frame layer:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F
b. Flood fill with Silver 54 pattern
c. CTRL+D
d. Add drop shadow #1 above.
e. Merge Down.

5.) Highlight small mat layer:
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

6.) Open tube: CTRL+C and close (if you are using same tube skip to step 7)

7.) On template: CTRL+L
a. Resize: 35 % (all layers unchecked)
b. Move to the lower left hand side (see mine for placement)
c. CTRL+SHIFT+I, Hit your delete key
d. CTRL+D
e. Change blend mode to: lumiance (l)
f. Merge down.

8.) Repeat step #4 with the small frame layer.
a. Merge Visible
b. Hide this layer.

9.) Open picketframe01: CTRL+C and close

10.) On template: CTRL+L
a. Resize: 475 pixels (width)
b. Using your magic wand click inside the picketframe.
c. Layers: New Layer: Selections: Modify: Expand: 2

11.) Open paper 13: CTRL+C and close

12.) On template: CTRL+SHIFT+L:
a. CTRL+D
b. Move this layer below the picketframe layer. If the picketframe layer is not active highlight it now.
c. Add drop shadow #2 above.
d. Unhide the frame layer: move to the top. (see mine for placement)

13.) Open chase: CTRL+C and close

14.) On template: CTRL+L:
a. Resize: 450 pixels (width)
b. Move slightly to the bottom of the tag. (see mine for placement)

15.) Open tube: CTRL+C and close (if you are using same tube skip to step 16)

16.) On template: CTRL+L
a. Resize: 65 % (all layers unchecked)
b. Move her to the chase and down a bit. (see mine for placement)
c. Using your selections tool: draw a rectangle around the bottom of her legs.
d. CTRL+H: 5
e. Highlight the chase layer: CTRL+SHIFT+P, CTRL+D
f. Move the new layer to the top.
g. Add drop shadow #3 above to tube layer and the promoted selection layer.
h. Merge down 2 times.

17.) Open lamp clock: CTRL+C and close

18.) On template: CTRL+L
a. Resize: 480 pixels (width)
b. Move to the left hand side, and move layer under the chase layer and the frame layer.(see mine for placement)
c. Add drop shadow #3 above.

19.) Open shoes01: CTRL+C and close

20.) On template: CTRL+L
a. Resize: 100 pixels (width)
b. Move to the lower left hand corner (see mine for placement)
c. Add drop shadow #4 above.

21.) Open butterfly05: CTRL+C and close

22.) On template: CTRL+L
a. Resize 90 pixels (width)
b. Move to the right hand side of the chase. (see mine for placement)
c. Add drop shadow #3 above.
d. Merge visible.
e. Resize: 95% (all layers unchecked)
f. Layers: New Raster Layer:
g. Flood fill with black.
h. Layers: Masks: Save/Load mask From Disk: gemsmask-98 (check source luminance, fit to canvas, hide all mask)
i. Merge: Group. Move this layer beneath the tag layer.

23.) Open rainbow: CTRL+M, CTRL+C and clsoe

24.) On template: CTRL+L:
a. Move to the upper right corner. (see mine for placement)
b. Move this layer in between the tag layer and the mask layer.
c. Merge all flatten.

25.) Resize: 500 pixel (all layers checked)
a. Add your copyright information
b. Watermark
c. Text, add drop shadow #4 above to the text.
d. Save as .jpg

You have just completed: Friends Of Wisterial Lane...Thank you for trying my tutorials.
DesignsByKarma

Admin
Admin

Posts : 69
Join date : 2012-03-26

View user profile http://designs-by-karma.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum