Rock With (TootyPup Inspired)

View previous topic View next topic Go down

Rock With (TootyPup Inspired)

Post  Admin on Fri Apr 06, 2012 10:15 am




Tutorial Title: Rock With
Written By: DesignsByKarma
Written On: April 4, 2012

This tutorial assumes you have a good working knowledge of Paint Shop Pro and its tools. It was written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush, mask, frame, tube, template or preset that belongs to you and I do not have you listed please let me know which items is yours and give me a link to your site so I can give you credit and a link!!

Materials: Not Included:
1 scrap kit: We Are All Rock Stars: By: TootyPupScraps
1 - 3 tubes: I am using the wonderful art work of Elias Chatzoudis and must be purchased at PspTubesEmporium (PTE) (This particular work of art was purchased when he was with MPT)
1 template: 5a: By Angel
1 mask: MC_Mask7: By MelissazCreationz

Materials: DBK_RockingWith
1 word art: dbk_rockwith Designs By Karma


Settings used throughout tutorial:
Weave Settings: 1, 2, 1, Weave and Gap color: (your background) , fill gaps checked
Weave Drop Shadow: 13 , 0 , 60 , 19.32 , #000000
Element Drop Shadow: 0 , 4 , 100 , 10 , #000000
Tube Drop Shadow: (-1) , 2 , 45 , 3 , #000000
WordArt Drop Shadow: 1 , 1 , 100 , 1 , #000000

Colors used throughout tutorial:
Foreground: #621a48 (a dark color from your tube)
Background: #f3a2bd (a light color from your tube)

Unzip all supplies. Let's Begin!

Tutorial: Instructions:
1. Open template: SHIFT+D and close original
a. Delete The Copyright layer
b. Highlight: Raster 1: Flood fill with your background color

2. Open paper tp-paper5: CTRL+C and close

3. On template: CTRL+L
a. Layers: Mask Layer: Load / Save Mask: MC_Mask7:
b. Merge group.

4. Open tp-doodle1: CTRL+C and close

5. On template: CTRL+L
a. SHIFT+S: 222 px (width)
b. Move to the left side of the template. (see mine for placement)
c. Apply drop shadow: Weave Drop Shadow Settings above
d. Highlight: Raster 2: CTRL+A, CTRL+F, CTRL+SHIFT+F

6. Open paper tp-paper4: CTRL+C and close

7. On template: CTRL+L
a. CTRL+SHIFT+I, hit your delete key, CTRL+SHIFT+I
b. Selections: Modify: Contract: 15: Flood fill with your dark color
c. Effects: Texture Effects: Weave: With settings above
d. CTRL+SHIFT+I: Effects: 3D Effects: Drop Shadow: With Weave Drop Shadow Settings above, Repeat drop shadow changing the color to your foreground (dark color)
e. CTRL+D
f. Delete original layer

8. Highlight: Raster 3: CTRL+A, CTRL+F, CTRL+SHIFT+F
a. Layers: New Layer: Flood Fill with your background color (light color)
b. Adjust: Add / Remove Noise: Add Noise: Random, 100, Monochrome Checked
c. CTRL+D
d. Delete original layer
e. Add drop shadow: With Element Drop Shadow Settings above
f. Repeat this step for Copy of Raster 3:

9. Highlight: Raster 4: Flood fill with your background color (light color)
a. CTRL+A, CTRL+F, CTRL+SHIFT+F

10. Open tp-spiralpaniokey5: CTRL+C and Close

11. On template: CTRL+L
a. SHIFT+S: 333 px (width)
b. Move slightly to the bottom left. (see mine for placement)

12. Open one of your tubes: CTRL+C and close

13. On template: CTRL+L
a. Move your tube to the right side so that it is inside of the marching ants.
b. SHIFT+S: 450 px (width) only if it is needed.
c. CTRL+SHIFT+I, hit your delete key, CTRL+D
d. Add drop shadow: With Tube Drop Shadow Settings above
e. Highlight: Raster 5: Flood fill with your foreground color (dark color)
f. Adjust: Add / Remove Noise: Add Noise: Uniform, 90, Monochrome Checked.
g. Apply drop shadow: With Element Drop Shadow settings

14. Repeat # 8 and # 9 for raster 6 and 7: (you can use the same tube or change it)

15. Open your last tube: CTRL+C and close (if you are using a different tube)

16. On template: CTRL+L
a. CTRL+M if need be.
b. SHIFT+S: 350 px (width) if needed
c. Move this layer below Raster 6
d. Using your eraser tube erase any part of the tube that is hanging over the piano keys (at the bottom of the keys)

17. Open microphone CTRL+C and close

18. On template: CTRL+L
a. SHIFT+S: 222 px (width)
b. Move to the lower right hand side. (see mine for placement)
c. Add drop shadow: With Tube Drop Shadow Settings above

19. Open tp-beads6 CTRL+C and close

20. On template: CTRL+L
a. Shift+S: 223 px (width)
b. Move to the lower left corner. (see mine for placement)
c. Add drop shadow: With the Element Drop Shadow above.
d. Duplicate this layer:
e. CTRL+I, CTRL+M
f. Move to the upper right hand corner. (see mine for placement.)
g. Move this layer below your main tube layer

21. Open dbk_rockingwith wordart: CTRL+C and close

22. On template CTRL+L and move to the left just a bit (see mine for placement)
a. Add drop shadow: With the WordArt Drop Shadow above

23. CTRL+A: Selections: Modify: Contract: 5
a. CTRL+SHIFT+I
b. CTRL+H: 5
c. Flood fill with foreground color (dark color)
d. Adjust: Add / Remove Noise: Add Noise (do this 2times)
e. CTRL+D

24. Merge all flatten. SHIFT+S: 500 px (width) all layers checked

25. Add your copyright information and watermark

26. Save as .jpg (for later use)

27. Add your name.

If you are an incredimail user I created a letter for your use. You can get it here

You have just completed: … Tutorial Name ...Thank you for trying my tutorials.
DesignsByKarma

Admin
Admin

Posts : 69
Join date : 2012-03-26

View user profile http://designs-by-karma.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum