I Get Evil (Black Widow Creationz Inspired)

View previous topic View next topic Go down

I Get Evil (Black Widow Creationz Inspired)

Post  Admin on Thu Apr 26, 2012 9:59 am




Tutorial Title: I Get Evil
Written By: DesignsByKarma
Written On: April 25, 2012

This tutorial assumes you have a good working knowledge of Paint Shop Pro and its tools. It was written in PspX2 but may be done in previous versions. My tutorials are from my own creative imagination any resemblance to other tutorials is strictly coincidental. If I am using a brush, mask, frame, tube, template or preset that belongs to you and I do not have you listed please let me know which items is yours and give me a link to your site so I can give you credit and a link!!

Materials: Not Included:
1 scrapkit: Devils Tear Drop: By:
BlackWidowCreationz and can be purchased at BlackWidowCreationz
1 to 2 tubes : I am using the wonderful art work of SQP (not sure where to purchase now but I am looking into it) (This particular work of art was purchased when he was with C.I.L.M)
1 template: kkTempz35: Kandi Kissez and can be downloaded here
2 masks: wsl_mask221 and wsl_mask355: By: Weescotslasscreations

Plug-Ins Used: Not Provided:
FMTile: Emboss:

Settings used throughout tutorial:
Mask Drop Shadow: 0, 0, 100, 10, #000000
Element Drop Shadow: 0, 4, 100, 10, #000000

Unzip all supplies. Let's Begin!

Tutorial: Instructions:
1. Open up kktempz35: SHIFT+D and close original.
a. Delete the credits layer
b. Unhide to background layer. Make sure it is highlighted

2. Open paper1: CTRL+C and close

3. On temp: CTRL+L
a. Layers: Load / Save Mask: From Disk: Apply the wsl_mask355
b. Merge group
c. Apply Mask Drop Shadow above
d. Highlight the black circle layer

4. Open paper10: CTRL+C and close

5. On temp: CTRL+L
a. Layers: Load / Save Mask: From Disk: Apply the wsl_mask221
b. Merge group
c. Effects: Plugins: FMTILE: Emboss: default settings
d. Highlight large pink rectangle
e. CTRL+A, CTRL+F, CTRL+SHIFT+F

6. Open paper8: CTRL+C and close

7. On temp: CTRL+L
a. CTRL+I: Hit your delete key
b. CTRL+D
c. Change blend mode to luminance(L)
d. Delete the large pink rectangle layer
e. Highlight the bottom black layer:
f. CTRL+A, CTRL+F, CTRL+SHIFT+F

8. Open your first tube: CTRL+C and close (unless you are only using one tube leave it open)

9. On temp: CTRL+L: Move your tube to the left side of the template: position to your liking
a. Duplicate this layer:
b. Move one of the duplicated layers down above the top black layer
c. CTRL+I: hit your delete key on the tube layer that is above the bottom black layer
d. CTRL+D
e. Change the opacity to 55
f. Highlight the top black layer
g. CTRL+A, CTRL+F, CTRL+SHIFT+F
h. On the tube layer above the top black layer
i. CTRL+I: hit your delete key
j. CTRL+D
k. Change the opacity to 55
l. Highlight the top frame layer
m. Adjust: Add / Remove Noise: Add Noise: 100, uniform, monochrome checked
n. Repeat for the bottom frame layer
o. Highlight small pink rectangle
p. CTRL+A, CTRL+F, CTRL+SHIFT+F

10. Open paper4: CTRL+C and close

11. On temp: CTRL+L:
a. CTRL+SHIFT+I: hit your delete key
b. CTRL+D
c. Delete small pink rectangle layer

12. Open image29: CTRL+C and close

13. On temp: CTRL+L
a. Move slightly to the right of template so it looks like the beast is coming out of the rectangle (see mine for placement)
b. Add Element Drop Shadow above
c. Highlight middle frame layer
d. Add same noise as before
e. Highlight kandi word art layer
f. CTRL+A, CTRL+F, CTRL+SHIFT+F

14. Open paper2: CTRL+C and close

15. On template: CTRL+L
a. CTRL+SHIFT+I
b. Hit your delete key
c. CTRL+D
d. Apply FMTILE: Emboss: default settings
e. Do Not Delete the original kandi word art layer: we are using that as an enhancement
f. Merge down 2 times.

16. Open image 31: CTRL+C and close

17. On template: CTRL+L
a. SHIFT+S: 250 px (width) all layers unchecked
b. Move to the left side of the top frame: (see mine for placement)
c. CTRL+M

18. Open image 5: CTRL+C and close

19. On temp: CTRL+L
a. SHIFT+S: 250 px (width)
b. Move to the bottom left frame: (see mine for placement)
c. CTRL+M
d. Adjust: Sharpness: Unsharp mask: default settings
e. Add element drop shadow

20. Open image 9: CTRL+C and close

21. On temp: CTRL+L
a. SHIFT+S: 250 px (width)
b. Move to the upper left corner (see mine for placement)
c. Adjust: Sharpness: Unsharp mask: default settings
d. Add element drop shadow

22. Open image 33: CTRL+C and close

23. On temp: CTRL+L
a. SHIFT+S: 325 px (width)
b. Move to the center towards the bottom (see mine for placement)

24. Open another tube or maximize your tube: CTRL+C and close

25. On temp: CTRL+L
a. SHIFT+S: 300 px (width)
b. Move to the left (see mine for placement)
c. Adjust: Sharpness: Unsharp mask: default settings

26. Open image 47: CTRL+C and close

27. On temp: CTRL+L
a. SHIFT+S: 350 px (width)
b. Move to the right (see mine for placement)
c. Add element drop shadow

28. Open image 28: CTRL+C and close

29. On temp: CTRL+L
a. SHIFT+S: 350 px (width)
b. Move towards the center so it is overlapping the boot
c. CTRL+R: Right: 32
d. Add element drop shadow

30. Open image 42: CTRL+C and close

31. On temp: CTRL+L
a. SHIFT+S: 275 px (width)
b. Move to the center (see mine for placement)

32. Open image 40: CTRL+C and close

33. On temp: CTRL+L
a. SHIFT+S: 120 px (width)
b. Move to the right (see mine for placement)
c. Layers: New Layer
d. CTRL+A

34. Open image 30: CTRL+C and close

35. On temp: CTRL+SHIFT+L
a. CTRL+D
b. CTRL+M
c. Change the blend mode to luminance(L)
d. Merge all flatten
e. SHIFT+S: 500 px (width) all layers checked

36. Add copyright information, watermark and text.

37. Save as .jpg

You have just completed: … Tutorial Name ...Thank you for trying my tutorials.
DesignsByKarma

Admin
Admin

Posts : 69
Join date : 2012-03-26

View user profile http://designs-by-karma.forumotion.com

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum